AG 700

Substrate type
Concrete, cement and gypsum surfaces, cement, cement-lime, lime and gypsum plasters, cement, gypsum and polymer finish coats and fillers, gypsum boards and other gypsum elements, walls made of ceramic and silicate bricks and hollow clay blocks as well as of cellular concrete blocks.

Substrate preparation
Substrate must have an adequate bearing capacity and be dry and free from dirt, dust and greasy spots. Remove loose paint coats and plasterwork. Chipped areas and irregularities should be patched with ALPOL AZ 135 levelling mortar. For new plasters, allow at least 2-week seasoning time.

Instructions for use
Before use, the primer should be stirred thoroughly and then applied evenly to the substrate in a manner appropriate to the type and condition of the surface: using a paintbrush or brush (rubbing it well into the substrate), using a paint roller or low-pressure spray (avoiding the formation of stains and spray mist). Do not thin with water. Repeat priming in case of highly absorbing substrates.

Tools
Paint brush, dash brush, roller, spraying dash brush, container.

Working conditions
Work in ambient and substrate temperatures between +5°C and +30°C. Do not free add other substances to the product. Protect freshly applied primer from excessive moisture and rain.

Storage
Store in original, unopened packages – shelf life 9 months from production date. Protect from freezing and overheating during transport and storage.

Notes
The specifications and instructions for use are based on the temperature of 20(±2)°C and relative air humidity 65(±5)%. The drying time may alter in different climate. Contains: post-reaction mixture of 5-chloro-2-methyl-2H-isothiazol-3-one [EC no. 247-500-7] and 2-methyl-2H -isothiazol-3-one [EC no. 220-239-6] (3:1). May cause allergic reaction. Wear safety goggles. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Protect your skin by using protective clothing and gloves. Keep out of the reach of children. Use water for cleaning tools. The manufacturer assumes no liability for damage resulting from unskilful or improper use of the product.

General recommendations
Work according to building practice, observing health & safety standards and regulations.